A lot of people sometimes get frustrated when they cannot figure out how to unblock their drains and end up having to call a plumber. However, if you follow these steps, you should be able to solve the problem yourself.
There are a few ways to unblock a drain yourself. Depending on the type of drain and the tool you are using, the process can be as simple as using a plunger or as involved as using a snake. If you have access to a plunger, place it over the drain and push and pull the handle in opposite directions until the obstruction is dislodged. If you don’t have access to a plunger, try using a piece of sturdy wire bent into an “S” shape. Insert it into the obstruction and twist it around until it breaks through. Finally, use your fingers to work the wire loose. If all else fails, try using a snake. To do this, place the snake so that its head is submerged in water and its body is sticking out of the drain. Slide your hand down the snake until you reach the obstruction. Squeeze its body until it loosens up the material around the obstruction. To remove “stringy” gunk from a drain, you can use the same technique mentioned above. Simply use your fingers to wrap around the stringy material and pull it loose. Since this problem is happening in the kitchen, try using a dish scrubber to make sure that the clog doesn’t continue down into the pipes below. If this method doesn’t work, you should call a plumber immediately.
What happens if you do not unblock the drain yourself?
If you do not unblock the drain yourself, water will continue to flow and damage your property. This can lead to costly repairs, and even a leak that could contaminate your home or soil. If you are unable to unblock the drain yourself, it is best to call a professional who will be able to do so quickly and inexpensively.
Some safety precautions when attempting to unblock a drain
If you have to unblock a drain yourself, there are a few things to keep in mind. First, make sure your hands and arms are well Above the Surface of the Drain. Second, wear protective gear including gloves, a long-sleeved shirt, and safety goggles if necessary. Finally, use a plunger to clear any objects that may be blocking the drain and then use a snake or auger to clear any blockage.
What to Consider Before You Unblock a Drain
If you find yourself in a predicament where you need to unblock a drain yourself, there are a few things to keep in mind. Here are four tips to help you get started:
1. Make sure the drain is completely plugged. If the drain is partially plugged, using too much force may cause the plug to break and flooding could occur. Before beginning, use a plunger or vacuum cleaner to clear any obstructions in the drain.
2. Use caution when using a plunger or other tool. Be aware of potential hazards around the drain, including sharp objects that can pierces the rubber suction cup and allow water to flow back into the pipe. Also be aware of your surroundings; don’t attempt to unblock a drain while standing on the edge of a roof or balcony.
3. Have all of the necessary supplies on hand before beginning: A plunger, rags, something to grip onto (like a railing), and safety goggles if desired. Basic tools include pliers, channel-lock pliers, adjustable wrenches, and screwdrivers. Some drains require specialty tools such as an auger or snake; be sure to check with your homeowner’s association or landlord before you begin.
4. Do not reach for the drain’s trap; instead, grip the drain handle or knob and pull down on it, setting the stopper into place. Don’t forget to test that the stopper is fully seated by inserting a wire coat hanger down the drain and pulling on it to make sure there’s no water flow or suction through the hole in the stopper. Once the stopper is set, you can proceed with clearing the debris and cleaning the drain. For more tips, read through this article and follow these step-by-step instructions.
What is a drain unblocker?
A drain unblocker is a plumbing tool that helps to clear blockages in the pipes. It works on the principle of using a plunger to push any objects out of the way and then use a snake or auger (also called a skimmer) to clear any blockage in the pipes. Another function of the drain unblocker is to be able to clear clogs in your toilet, sink, bathtub, or shower. The drain unblocker is often used by plumbers and pipefitters, however it can be very useful for homeowners too. The drain unblocker can be used manually, or as part of a plumbing system.
How do I use the drain unblocker?
The key to using the drain unblocker is to push it in, then twist and pull it shut on one side then the other. This should break up any blockages in the pipes and make them easy to clear. The reason why you have to pull it shut is because the plunger cannot move when at the mid way point. So once you have pushed it in and twisted it, you need to pull it shut so that the plunger can move.
Conclusion
If you have tried all the traditional methods to unblock a drain and they have not worked, it might be time to call a professional. There are a number of ways to unblock a drain yourself, but some may be more dangerous than others. Before attempting any of these methods, make sure to read the instructions carefully and avoid damaging your pipes. If you do not have patience, it is better to call a professional.
