Transmission fluid is one of those things that can seem like it should be changed every week, but because of the sheer number of fluids and their varying degrees of thickness, it’s not always clear what the right time frame is. This article tells you how to figure out the correct time frame for changing your transmission fluid.
What’s the Difference Between Transmission Fluid and Transmission Flush?
Transmission fluid and transmission flush are two terms that can be used interchangeably. However, there is a difference between the two. Transmission fluid is the fluid that circulates with the transmission inside of your car or truck. It lubricates the gears and gears within the transmission and reduces friction when they rotate. Transmission flush is simply a way that you can clean your transmission. Transmission flush is typically used when a car or truck does not shift properly, and the transmission was replaced years prior to me.
Why Should I Change Transmission Fluid?
Transmission fluid is a lubricant designed to reduce friction and heat between the transmission and engine. Over time, the transmission fluid will break down and start to burn. This will cause the transmission to hesitate or slip, and eventually, it will need to be replaced.
As mentioned above, the main reason for periodically changing the fluid in your transmission is that it reduces friction within the transmission. If there is too much friction between its gears then you will notice some issues with your shifts. In most cases, this means that you will not be able to get your gears into the various gears that you need. This can lead to a loss of control on the road and potentially serious accidents. That is why it is crucial to change your transmission fluid at least once every 30,000 miles, or as necessary if there has been an accident or any other problems with the transmission.
What Are Some Things That Can Cause a Transmission to Leak Transmission Fluid?
If you’re experiencing transmission problems, it’s important to take a look at your fluid levels and make sure they are correct. Here are some common causes of transmission leaks:
– Overfilling the transmission with fluid
– Poorly mixed transmission fluid
– Faulty or worn transmission components
– Too-high transmission fluid level
– A leaking transmission line.
Transmission leaks are very common in many vehicles. They can be caused by a number of things from worn shift linkage to loose fillister bolts to bad seals. Diagnosing these leaks is best done with a diagnostic engine It’s a common misconception that all transmission fluid should be changed when the transmission fluid is dirty or low. While this is true for older transmissions, modern transmissions operating at high speeds use lithium-sulfate (LiSS) transmission fluid. Check your manual to see if your vehicle requires a differential or full case of new transmission fluid. The cost of a replacement is just as important as the time needed for the job, so it’s best to have this done by a professional.
How Often Do You Need to Change Transmission Fluid?
Most automakers recommend changing your transmission fluid every 7,500 miles. However, this is a guideline and not a rule. In fact, many mechanics believe that you should change your transmission fluid more often than that – every 3,000 miles or even every month. It all depends on your driving habits and how well your transmission is functioning. If you experience any problems with your transmission, be sure to schedule a tune-up as soon as possible so that the mechanic can check to see if your transmission needs to be replaced. If you are noticing a funny smell from your transmission, then it is probably time to change your fluid.
If your car is over 10 years old, you should change the transmission fluid every 3 to 5 years. If your car is 6 to 10 years old, you should change the transmission fluid every 6 to 12 months. If your car is new or within 1 year of being new, you should change the transmission fluid every 3 months.
How do I check the fluid level in my transmission?
There are several methods of checking fluid levels in transmissions, and they may all be correct depending on the type of transmission you have. The easiest and fastest method is to simply put a little finger or thumb into the dipstick tube while the vehicle is running, release it when it reaches your desired level, and then repeat until full. Another option is to fill the reservoir with fluid to within 1/2” of the top, then manually check each level until it is full. If you do not have a level to check or if you are uncertain, simply check the fluid level with your dipstick and refill as needed.
How to Change Transmission Fluid
Changing the transmission fluid is a fairly simple procedure where a person can change their own transmission fluid. Before you do anything and make sure your car is cool, turn off your car’s ignition and leave it in the park at all times once the fluid has been added to your transmission. Then follow these steps:
1. Place a container under your car’s transmission pan, that is located on the front of your car or trunk.
2. Pour the recommended amount of transmission fluid into your container under the pan.
3. Wait 24 hours and then drain out the old fluid using a shop vac or similar device. Wash up any spilled fluid off with water and allow it to dry before continuing with your day. If you are unable to do this part yourself, ask a friend or family member to help if possible, but be sure to not spill any fluid on them.
4. Fill the transmission with the proper amount of fluid using the recommended fill level for your specific model year and part number.
5. Start your car, engage all the electronic controls such as locking or unlocking the doors and check for leaks.
6. Check to make sure that you have added a full quart of fluid if your car requires it, but only if you are not able to do so yourself
7. Check for leaks twice more in just under a week if you are still experiencing problems. Again, if the vehicle continues to leak, have your local mechanic take a look at it as soon as possible.