The Differences Between Conventional and Synthetic Oil Changes

Most carmakers recommend an oil change between 7,500 and 10,000 miles, or once a year, whichever comes first. The type of oil used can affect how often it needs to be changed. Here’s a look at conventional and synthetic oils and when to use them.

Conventional motor oil is refined from crude oil and contains additives to help protect engines. It’s the most common type of motor oil used in vehicles. Synthetic motor oil is man-made and designed to last longer than conventional oil. It can better withstand high temperatures and protect against deposits.

If you’re not sure which type of oil to use in your vehicle, check your owner’s manual or ask your mechanic.

Difference Between Conventional and Synthetic Oils

When it comes to oil changes, there are two different types of oils that can be used – conventional and synthetic. But what exactly is the difference between the two?

Conventional oil is the most common type of oil used in vehicles. It is derived from petroleum and is a mixture of different hydrocarbons. Synthetic oil, on the other hand, is man-made and designed to provide better protection for your engine.

So, what are the key differences between these two types of oils? Let’s take a closer look:

1. Protection

One of the biggest differences between conventional and synthetic oil is the level of protection they offer. Synthetic oil is designed to better protect your engine against wear and tear, as well as high temperatures. It can also help to improve fuel economy.

2. Cost

Another key difference is cost. Synthetic oil is typically more expensive than conventional oil, but it can sometimes last longer before needing to be changed. This means that you may end up saving money in the long run by using synthetic oil.

3. Environmental Impact

It’s important to consider the environmental impact of each type of oil. Conventional oil is derived from petroleum, which is a non-renewable resource. Synthetic oil, on the other hand, can be made from renewable resources like plants or recycled materials. So, if you’re looking for an eco-friendly  option, synthetic oil could be the better choice.

Overall, there are a few key differences between conventional and synthetic oil that can help you make an informed decision when it comes time for an oil change.

Benefits of Synthetic Oil Change

Assuming you are talking about motor oil, there are several benefits to using synthetic oil instead of conventional oil.

1. Synthetic oil lasts longer. This is because it is designed to withstand higher temperatures and pressures than conventional oil. It also has fewer impurities, so it doesn’t break down as quickly. This means you can go longer between oil changes with synthetic oil.

2. Synthetic oil performs better in cold weather. Conventional oil thickens when it’s cold, making it harder for the engine to start. Synthetic oil doesn’t have this problem, so your engine will start more easily in cold weather if you use synthetic oil.

3. Synthetic oil protects your engine better. Because it lasts longer and performs better in extreme temperatures, synthetic oil does a better job of protecting your engine from wear and tear. This means your engine will last longer if you use synthetic oil.

Synthetic oil is better for your car and will save you money in the long run since you won’t have to replace your engine as often.

How Often Should You Change Your Oil?

How often you should change your oil largely depends on the type of oil you are using. If you are using conventional oil, most mechanics generally suggest changing your oil every 3,000 miles or every 3 months, whichever comes first. However, if you are using synthetic oil, most mechanics generally suggest changing your oil every 5,000 miles or every 6 months, whichever comes first.

One way to think about it is that with conventional oil, you are essentially just replacing the dirty oil with fresh oil. Synthetic oil, on the other hand, actually cleans and lubricates your engine as it runs. Therefore, you can go longer without an oil change when using synthetic oil.

Steps to an Effective Oil Change

If you’re unsure about which type of oil change is right for your car, it’s important to understand the difference between conventional and synthetic oil changes. Conventional oil is the most common type of motor oil used in vehicles. It’s made from crude oil that’s refined and then blended with different types of additives. Synthetic oil, on the other hand, is man-made and designed to withstand extreme temperatures and conditions.

Here are a few steps to take to ensure you’re getting an effective oil change, no matter which type of oil you use:

1. Check your owner’s manual first. This is the best way to know what kind and how much oil your car needs. Different cars have different requirements.

2. Choose the right oil filter. Your mechanic can help you select the right filter for your car and driving habits.

3. Choose the right viscosity or thickness of motor oil. Again, your owner’s manual will have recommendations, or you can ask your mechanic for help.

4. Follow the correct procedure for adding motor oil to your car. Most cars have a dipstick under the hood that show you how much oil is needed and where to add it. Be sure not to overfill!

5. Get regular tune-ups and check-ups according to the schedule in your owner’s manual, or as recommended by your mechanic

Cost Comparison Between Conventional and Synthetic Oils

As anyone who has had to get their oil changed knows, there can be a significant cost difference between conventional and synthetic oils. But what exactly is the difference between these two types of oils?

Conventional oil is made from crude oil that is refined and then blended with other chemicals to create the finished product. Synthetic oil, on the other hand, is man-made and designed to meet or exceed the standards set for conventional oil.

So, which one should you use in your car? The answer may surprise you.

While synthetic oil costs more than conventional oil, it actually lasts longer and provides better protection for your engine. In fact, most carmakers now recommend synthetic oil for their vehicles.

If you’re looking for the best value, then synthetic oil is probably the way to go. Not only will it save you money in the long run, but it will also help keep your engine running smoothly and efficiently.

Conclusion

All in all, it is quite evident that conventional and synthetic oil changes have their own features. However, both are just as important when it comes to ensuring your car’s engine stays healthy. Therefore, depending on the make and model of your vehicle and its usage conditions, you can determine which type of oil change fits best for you. Make sure to consult a certified mechanic before making any decisions regarding oil changes since they will be able to provide professional advice about what type of lube would benefit your vehicle the most.

Faqs

1. What is the difference between conventional and synthetic oil?

Conventional oil is a petroleum-based product that is refined from crude oil. Synthetic oil is a man-made product that is designed to resemble conventional oil.

2. How often should I change my oil?

The frequency of oil changes depends on the type of vehicle you drive, how you drive it, and what type of oil you use. Consult your owner’s manual or a qualified technician for specific recommendations.

3. Why should I use synthetic oil?

Synthetic oils offer superior protection against engine wear, extreme temperatures, and deposits. They can also improve fuel economy and extend the life of your engine.

4. How much does an oil change cost?

The cost of an oil change varies depending on the type of vehicle you drive and the type of oil you use. Conventional oils typically cost less than synthetic oils.